Micon Products Ltd. supplies high quality integral drill steel also known as chisel steel for use in mining and construction. We keep a large amount of inventory in stock including short rods for drilling small holes as well as small and large series integral rods for drilling long holes. Standard shank size is 7/8”x4-1/4” for use on hand held rock drills as well as jack leg drills.
Integral Rods 7/8" x 4 1/4" Shank 7/8" x 3 1/4" Also Available
| Part # - Length Under Collar | Bit Size mm | Bit Size Inches | Weight Lbs |
|---|---|---|---|
| 714-0635-2' | 35mm | 1 3/8" | 5.25 |
| 714-1234-4' | 34mm | 1 11/32" | 9.5 |
| 714-1833-6' | 33mm | 1 19/64" | 13.75 |
| 714-2432-8' | 32mm | 1 1/4" | 17.75 |
| 714-3231-10'6" | 31mm | 1 7/32" | 22.5 |
| 714-4030-13' | 30mm | 1 3/16" | 28.5 |
| 714-4829-15'9" | 29mm | 1 5/32" | 34 |
| 714-0834-2'7" | 34mm | 1 11/32" | 7 |
| 714-1633-5'3" | 33mm | 1 19/64" | 12 |
| 714-0840-2'7" | 40mm | 1 37/64" | 7 |
| 714-1639-5'3" | 39mm | 1 17/32" | 12 |
| 714-2438-8' | 38mm | 1 1/2" | 17.75 |
| 714-3237-10'6" | 37mm | 1 29/64" | 22.5 |
| 714-4036-13' | 36mm | 1 27/64" | 28.5 |
| 714-4835-15'9" | 35mm | 1 3/8" | 34 |
| 714-5634-18'4" | 34mm | 1 11/32" | 40 |
| 714-6433-21' | 33mm | 1 19/64" | 46 |
| 714-0641-2' | 41mm | 1 5/8" | 5.25 |
| 714-1240-4' | 40mm | 1 37/64" | 9.5 |
| 714-1839-6' | 39mm | 1 17/32" | 13.75 |
| 714-2438-8' | 38mm | 1 1/2" | 17.75 |
| Other Sizes Available On Request | |||